pdf Gfa 060an issue 3 20230405 Popular

MISCELLANEOUS AIRWORTHINESS INFORMATION - LS 1 series.

1. LS 1f. Rolladen Schneider technical bulletin No. 29 describes the optional modification of the instrument panel to improve visibility. Parts and drawings should be obtained from Rolladen Schneider or their Australian Agent. 2. LS 1f. Rolladen Schneider technical bulletin No. 30 describes the optional modification of the control column to change the ratio of  control column travel for aileron to elevator. Parts and drawings should be obtained from Rolladen Schneider or their Australian Agent. 3. LS 1f. Rolladen Schneider technical bulletin No. 31 describes the optional installation of tail ballast. If tail ballast is installed the increase in minimum and decrease in maximum pilot weights must be determined by the holder of a DA1109 Glider Inspectors Certificate endorsed for weight and balance and the placards altered accordingly. Copies of this technical note may be obtained from the GFA secretariat. Parts and drawings should be obtained from Rolladen Schneider or their Australian Agent. 4. LS 1f. Rolladen Schneider technical bulletin No 51 describes the optional installation of a later model tailplane locking device featuring a spring loaded ratchet. Copies of this technical note may be obtained from the GFA Secretariat. Parts may be obtained from Rolladen Schneider or their Australian agent.